Menu

Nassereddine GUERFI

SIDI MEZGHICHE

En résumé

Mes compétences :
Siemens Hardware
Programmable Logic Controller
Diesel
Calibration
Air Compressors
analytical skills
Transformers
Thermocouples
SCADA
Operating Systems
Multimeters
Microsoft Word
Microsoft Windows
Microsoft PowerPoint
Microsoft Excel
Matlab
Low Voltage
Linux
Generators
Electrical Engineering
Assembler

Entreprises

  • Metka - Commissioning supervisor

    2014 - maintenant

  • ANSALDO ENERGIA - Instrument and electrical commissioning Supervisor

    2014 - maintenant * Project: Gas Turbine Power Plant (2*131.95 MW) (ain djasser batna Algeria)-client :SONELGAZ

    * Supervising Precommisssioning & commissioning activities. ;
    * Start-up of different pump (diesel & electric). ;
    * Test for all power cables meger and hypot (insulation test).
    * Strating the fire and gas systeme with the vendor SANCO and making all alarms similation .
    * simulation and calibration all instrument .
    * Starting the poste gas and the heater . ;
    * Simulate all vales and instrument for turbine with DCS
    * Test all protection for the panels of MV by simens vendor.
    * Test all breakers (opening, closing, trip.....). ;
    * Troubleshooting and diagnostics on Gas Turbine and Auxiliary System. ;
    * Starting the air compressor

  • Turbomach - Instrument and electrical commissioning Supervisor

    2012 - 2014 &Electrical commissioning Supervisor with EVOLUTEC INTERNATIONAL for TUBOMACH (CATERPILLAR COMPANY).
    * Project: Gas Turbine Power Plant (3*5 MW) (ILLIZI Algeria)-client :SONELGAZ

    * Supervising Precommisssioning & commissioning activities:
    * Check the hot loop of different instruments and valves from site to DCS.
    * Start-up of the gaz and station. ;
    * Start-up of different pump (diesel & electric). ;
    * Check F&G system by making alarms. ;
    * Start-up air compressors for instruments & turbines. ;
    * Adjusting all parameters to ensure turbines running. ;
    * Solving the turbines trip problems.
    * Chech the ESD system ;
    * Control of parameters during trubines running ( gaz pressure, temperature and flow, running rate, output of turbine generator, frequency...)
    * Check turbines synchronisation. ;
    * Start-up the turbine and solving all problemes ;
    * Produce energie to outside network ;
    * Work in exploitation of the plant for BOP and turbine

    * Starting the heating gas system (CPL CONCORDIA). ;
    * Compressed air system by (ATLAS COPCO) compressor. ;
    * Starting the water treatment system with the vendor. ;
    * DCS system (SIEMENS).
    * Starting the HVAC system.
    * Commissioning of the ESD system.

  • Petrofac - Instrumentation QA/QC Inspector

    Jersey 2011 - 2012 strumentation with CEVIELEC SPA for PETROFAC INTERNATIONAL.
    Project: ELMERK CENTRAL PROCESSING AND FACILITIES (C.P.F) (elmerk Algeria) client: SONATRACH-ANADARKO.
    * Inspection of different instruments and valves calibration.
    * Inspection of different instruments & valves installation and wiring in the site.
    * Inspection of different instruments and valves tubing leak test.
    * Inspection of F&G instruments installation and wiring.
    * Inspection of junction box and marshaling installation and wiring.
    * Inspection of LV, MV, HV and control cables testing (continuity test, insulation resistance & HIPOT).
    * Inspection of lighting system.
    * Inspection of transformers installation.
    * Inspection of ear thing system. ;
    * Inspection of instrument & electrical cable trench prior to backfilling.
    * Inspection of instrument & electrical cable try installation

  • Samsung - Supervisor Instrumentation

    La Plaine Saint-Denis 2009 - 2010 Project: Adaptation and rehabilitation of the refinery RAK1 (SKIKDA ALGERIA) client: SONATRACH.
    * Supervising all instrumentation construction activities (instruments installation & wiring, junctions box and panels installation and wiring, different cables pulling, cable tray installation).
    * Coordination with quality control department for the work inspection.
    * Ensure the acceptance of the work inspection. ;
    * Make reports about work progress for project manager. ;
    * Sign the work permit for workers.
    * Providing all materials necessary for work.
    * Startup of different unit.
    * Assist of maintenance period.



    *

Formations

Pas de formation renseignée

Réseau

Annuaire des membres :