Menu

Aissa NETTOUR

SKIKDA

En résumé

•Mastery (QA/QC) ANSI,API,ASME,ASTM,AWS piping. Industrial mechanic. Petrochemical mechanic.
•Master the control non descrubtive (NDE) (RT, PT, MT, VT, UT) and (PWHT) post weld heat treatment.
•Interpret / Review NDT Reports and maintain all related file and Reports .
•Familiarly with interpretation of drawing, welding Symbols.welding imperfections.
•Preparation and handover of final test packs and As Built Drawings
•Control of operating software: MS Word, MS Excel.

Mes compétences :
Qualité
NDT QA/QC
ENGINEER
QA/QC
PIPING
WELDING
NDT
Norme ISO 9001 V2008

Entreprises

  • Sontrach-PVEP-PTTEP - QA/QC Engineer (piping.Pipline.NDT.welding.mechanical.testing)

    2016 - maintenant Project JGC-BIR SEBA FIELD DEVELOPMENT PROJECT. HASSI MESSAOUD.ALGERIA
    -supervision and inspection welding and coating the two pipelines deviation 12'' & 4" .
    Material Inspections
    QA/QC piping in charge of the pipelines (mechanical, welding, testing)
    •Material Inspections.
    •Control of drawings, isometrics and P&ID.
    Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.
    Prepare all necessary QA / QC painting / coating documents and handed over to clients review.
    Undertake QC painting / coating activities in the work place for daily basis.
    Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surface preparation and painting / coating procedure
  • HANWHA ENGINEERING AND CONSTRUCTION - Supervisor mechanical

    2016 - 2016 • Project Name: Algeria 450MW Biskra Simple Cycle Power Plant
    Material Inspections
    •Control of drawings
    •Followed mechanical assembly.
    •Followed welding.
    •Verify the availability and adequacy of the material and drawing
  • Rheimetall International Engineering - SV QA/QC

    2015 - 2016 Realisation project E.P.C. appurtenant structures of Line 8'' GPL
    Skikda - Berrahal and MP 12'' Skikda - Berrahal and Skikda-Khroub.

    -supervision and inspection welding and coating the two pipelines deviation 16'' for new Boosting SBF skikda -belrahel and skikda elkherob
    Material Inspections
    QA/QC piping in charge of the pipelines (mechanical, welding, testing)
    •Material Inspections.
    •Control of drawings, isometrics and P&ID.
    Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.
    Prepare all necessary QA / QC painting / coating documents and handed over to clients review.
    Undertake QC painting / coating activities in the work place for daily basis.
    Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surface preparation and painting / coating procedure
  • BONATTI - INSPECTOR NDT

    Parma 2014 - 2015 project Separation and Boosting Facilities (SBF)-ALRAR

    inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment. -Scheduling and organizing specialist project execution; -Running all sub-contractor welding activities on/off site fabrication shops.
    -Supervise installation of pipeline, stringing of pipes, welding , valve installations , insulation of underground piping , sand blasting , painting , conduct holiday test ,excavation of trenches for underground pipes , installation of supports for underground and above ground pipes
    -Reviewing of the test procedure, welding procedure specification, PQR, WQT method and statement. -Preparation of requests and reports for the client and co-ordinate with client responsibilities.
    -Check the essential parameters as per the WPS requirements and Quality procedure.
    -Qualify the welders as per project requirements.
  • Ferrostaal - QA/QC ENGENIERR

    Levallois Perret 2013 - 2014 Realisation project E.P.C. appurtenant structures of Line 8'' GPL
    Skikda - Berrahal and MP 12'' Skikda - Berrahal and Skikda-Khroub.

    -Responsible for NDT inspection of radiographic inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment. -Scheduling and organizing specialist project execution; -Running all sub-contractor welding activities on/off site fabrication shops.
    follow the welding process
    follow pipeline work & piping
    all documents regarding the welding works (ndt.coating.electric broom.cathodic protection)
    all documents work regarding civil engineering, electrical and instrumentation
  • Samsung Engineering - Piping engineer/construction

    Séoul 2012 - 2013 Project Rehabilitation & Adaptation of Skikda Refinery .

    Supervised for the piping erection and installation activities as per project specifications, applicable codes and standards. Supervised for the implementation contractors with regards to quality and safety in their specific jobs. Ensure that implementation contractors comply with all aspects of HSE Worksite policy plans site regulations and client requirements
    1. Piping fabrication and installation for chilled water pipeline.
    2. Spool generation preparation base on ISO METRIC Drawings.
    3. Weld joints monitoring for weld history record and NDT request.
    4. Test Package preparation for submission to QC prior for hydro testing.
    5. Preparation of Method of statement for insulation installation and metal cladding.
    6. Prepared inspection notification to QC department prior for inspection and approval.
    7. Monitoring of Insulation and aluminum cladding installation.
    8. Witness for PMI testing for stainless pipe base on material composition.
    9. Organize crew for fabrication of pipe spools and supports, schedule daily production and activities for the group, coordinates with field supervisors to take accurate information on their priorities. Ensure that drawings are correctly interpreted and carried out including field inspection testing requirements to ensure quality of works meets QP ITP and specification. Supervise delivery of pipe spools, pipe supports and installation. Later when fabrication was finished, worked as piping inspector. Responsible for inspection of pipeline prior to hydrostatic test and reinstatement.
    10. Supervise fabrication of pipe spools, supports and installation of pipeline above and underground for potable water and waste water line. Submit daily progress report and recommend solutions on problems encountered on sites. Conduct hydrostatic test on complete pipeline. Co-ordinate works between pipe fitters and electricians to avoid clashes and ensure that installations were carried out to the approved procedure.
    11. Supervise installation of pipe spools, valves, pipe supports and welding. Interpretation and mark up of isometrics and P & ID’, ensuring workers understand the job. Prepare work permits and carry out workers evaluation. Modification of pipe line due to some obstructions. Update daily progress report and follow up delivery of materials for my area.
    12. Supervise installation of pipeline, stringing of pipes, welding , valve installations , insulation of underground piping , sand blasting , painting , conduct holiday test ,excavation of trenches for underground pipes , installation of supports for underground and above ground pipes.
    13. Inspection of pipe line prior to hydrostatic test and back filling of trenches. Submit daily progress report and activities of our men at site. Supervise also cold cutting and cold tapping of flow lines.
  • All nations - (QA / QC) NDT engineer

    2010 - 2012 Project Rehabilitation & Adaptation of Skikda Refinery .

    -Following welding activity, planning RT non destructive testing, interpreting RT films according to API 1104, ASME and AWS D1.1, at the end I’ve comprised all my activity and put together the final documentation on this NDT area Black Sea.
    JOB OBJECTIFS

    -Part of a field inspection team assigned at fabrication yard tasked to carry out various NDT methods to fabricated offshore structure components such as piles, buoys, jackets, FPSO modules, jackets, decks, mud mats, deep water manifolds, risers, and piping. -Performing NDE inspections and examinations on rotating and pressure retaining equipment in accordance with company standards, customer specifications and ASME Section IX requirements. -Assigned at locations onshore /offshore performing various NDT methods for the testing of welding elements, pipelines, process piping, hulls and pressure vessels. -Reviewing and revising NDT related documents; and training of Junior Inspectors. -Also carry out macro etching, hardness testing, welding, cutting, and marketing of company services. -Implementation of International Standards coordination as RT for GSP, EN and ASME, ANSI B.31.1, ASTM, API 1104; 650, AWS D1.1 & D1.8. -Film interpretation in accordance with relative specifications, preparing specific procedures, NDT reports, inspection of rotary equipments for various semi-submersible and jack-up drilling rigs. -Reviewing of the test procedure, welding procedure specification, PQR, WQT method and statement. -Preparation of requests and reports for the client and co-ordinate with client responsibilities. -Check the essential parameters as per the WPS requirements and Quality procedure. -Qualify the welders as per project requirements. -Check radiographic films of classification, radiographic sensitivity type for IQI, subject and film contrast type of exposure. -Checking for ensure that welders are qualified to the WPS. -Prepare NDT reports and technical documentation for all welding joints required as per ITP.
  • subcontractor SAMSUNG.Co,Ltd. - QC Engineer NDT(QA/QC)

    2010 - 2011 Project Realization and rehabilitation of complex RA1KRefinery. SKIKDA .ALGERIA
    Main tasks:
    • Responsible for NDT inspection of radiographic inspection, magnetic particle testing,
    Penetrate testing, heat treatment, welding inspection and visual inspection of pipelines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
    • Scheduling and organizing specialist project execution;
    • Running all sub-contractor welding activities on/off site fabrication shops.
    • Reviewingof thetestprocedure,weldingprocedurespecification,PQR,WQTmethodand statement.
    • Painting/coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing hips.
    • Monitor weather condition for surface preparation and painting/coating application.
  • subcontractor SAMSUNG.Co,Ltd. - QC Engineer NDT(QA/QC)

    2010 - 2011 Project Realization and rehabilitation of complex RA1KRefinery. SKIKDA .ALGERIA
    Main tasks:
    • Responsible for NDT inspection of radiographic inspection, magnetic particle testing,
    Penetrate testing, heat treatment, welding inspection and visual inspection of pipelines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
    • Scheduling and organizing specialist project execution;
    • Running all sub-contractor welding activities on/off site fabrication shops.
    • Reviewingof thetestprocedure,weldingprocedurespecification,PQR,WQTmethodand statement.
    • Painting/coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing hips.
    • Monitor weather condition for surface preparation and painting/coating application.

Formations

  • ASNT (Algeria)

    Algeria 2016 - 2016 NDT LEVEL II

    Certificate NDT Time of Flight Diffraction (TOFD) ASNT level II
    Certificate NDT Phased Array (PA) ASNT level II
  • RINA (Skikda)

    Skikda 2014 - 2014 ASNT LEVEL 2

    ASNT LEVEL II (VT,UT)
  • African Quality Institute (L'Ariana)

    L'Ariana 2014 - 2014 Quality

    Start and grow its consulting business and prepare for the official certification of a company
     Know implement a quality approach that allows the company certification
     Know the methodology of Quality
     Know how to prepare a draft certification
     Understand how to organize practice a Quality (timing, difficulties, bodies and the monitoring, means to implement, critical moments .....)
  • Institut Français De L'Energie APAVE IFE APAVE

    Taverny 2011 - 2012 ASNT /NDT level 2

    Certificate of inspector - RT level II & film interpretation
    PT level II
    MT level II
    Certificate Of Radiation Protection Gammagraphy
  • Université De Skikda (Skikda)

    Skikda 2005 - 2010 electromechanic, Option industrial mechanic

    • Baccalaureate fabrication of mechanic Skikda
    • BAC+ 5 electromechanic, Option industrial mechanic University of Skikda.

Réseau

Annuaire des membres :