Menu

Abderrahmane BOUHADJER

ARZEW

En résumé

Pas de description

Entreprises

  • HYUNDAI ENGINEERING CO. LTD - QC Mechanical/Piping Inspector

    2013 - 2015 Work details:
    - Fabrication shop DRM (GTP hassi messaoud)
    * Manager prefabrication and assembly piping, in shop fabrication

    * Preparing necessary dossier (report, certificate) for procedure Qualification record (PQR)

    * Confirm the suitability of WPS, PQR before fabrication and welding before activities begins, that are performed in compliance with the approved procedures. ;
    * Welding qualification test (WQT) ;
    * Welding Inspection before, during & after welding. ;
    * Fit-up &visual inspections
    * Daily wilding visual report
    * Control NDT report (RT-PT)
    * Preparation for spool release report
    - BIR EL MSANA FIELD DEVELOPMENT PROJECT (CPF)
    * Review of PTW/TBT prior starting activities and ensure continuous monitoring

    * Management Flanges Tightening ( Dynamometric Key, Torque Machine, Tensioning Machine)

    * Static equipment ;
    * Padding elevation &Centering
    * Installation leveling or alignment ;
    * Grouting work ;
    * Trail installation &internal inspection ;
    * Box up &final box up
    * ROTATING EQUIPMENT
    * FOUNDATION STRUCTURE RELEASE

    * SHIM PAD INSTALLATION

    * INSTALLATION OF EQUIPMENT

    * BASE PLATE / MOUNTING PLATE LEVEL

    * PRELIMINARY ALIGNMENT

    * GROUTING OF MOUNTING PLATE / BASE PLATE

    * CONNECTION OF PIPING TO PUMP NOZZLES.

    * FINAL COLD ALIGNMENT

    * installation complete (excluding pain t& installation activity). ;
    * final visual inspection
  • : Daewoo Engineering & Construction - QC Piping Inspector

    2012 - 2013 Work details:
    * Involved in inspection such as line checking, punch listing, testing of spool and preparation of test package documents.
    * Pressure test (hydrostatic - pneumatic) inspections ;
    * Air Blowing Inspection. ;
    * Final Bolt Tightening for pre- commissioning (Torque wrench , Torque value ,tensioning machine) ;
    * Reinstatement & final acceptance with the owner. ;
    * Assigned in the pre-commissioning activities such as hydro testing, pump mechanical running test, tightness test, water flashing, steam blowing and hot bolting.
  • MITSUBISHI HEAVY INDUSTRY, LTD .Algeria - QC Mechanical / Piping Inspector

    2011 - 2012 Work details:

    * Review of PTW/TBT prior starting activities and ensure continuous monitoring

    * Wrapping& Holiday Test.
    * NDE (PT-PMI-HARDNESS) Inspections ;
    * Ferrite Content Check by Ferrite scoop Measurement. ;
    * Pneumatic & Hydrostatic Test. ;
    * Test pack: check line/ Punch Clearing / Reinstatement ;
    * Assist and support contractors and vendors throughout the completion (MC,PC, COM, Hand-over) phases of the projects
    * Completion of inspection check sheets and visual examination of components such as piping, valves, rotating equipment

    * Follow up Safety Valves Calibration (Poping Test & Leak Test)

    * Follow up Valves Repair and Testing ( Seat Testing, Shell Testing)

    * Supervision of static equipment vessel, column ( final installation ,visual inspection, internal cleaning ,catalyst& ceramic loading )
    * Provide assistance in Mechanical Completion, Commissioning, and Start-up activities as required facilitating these activities
  • PT.PROMITS Construction - Piping engineer

    2009 - 2011 Work details:
    * Supervise, monitor and report on contractor performance in the areas of quality, safety, progress, schedule and productivity
    * Piping design, preparing isometric drawings, piping plan & etc

    * Supervision and control of all piping erection , pipe support installation according to the arrangement and isometric drawing ( conformity of spools, rate and type of valves, fittings, bolts)

    * Witness of alignment, orientation and dimensions of installed piping

    * Inspection of gaskets, supports, valves prior to line reinstatement acceptance as per the latest drawing for construction, codes and specification standards

    * Line check, punch close, reinstatement

    * NDT Witness PMI , HARDNES
  • Orascom Construction Industries - Piping superviseur

    Le Caire 2008 - 2009  Prepare daily reports of work progress and man power utilize
     Prepare weekly reports of the total spool erection, isometric weight installed, welded dia inches of supports and joints and the remaining work front with the materials available.
     Co-ordinate with the sub contractors to achieve the targets and schedule set by the planning.
    Issue the work permits ensuring SHE requirements.
     Conduct safety walk through in the site in co-ordination with the safety department on weekly basis.
     Supervision of all piping works and ensures safety and quality standards of the client.
     Inspection and approval of all the QA/QC submittals of the subcontractor.
     Ensure that pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe support details.
     Line check to verify the use of correct material fittings, valves, and supports, prior to hydro test and prepare punch list for incomplete works, check and closing after the work is done.
     Check flow direction arrows on valves; verify that they are properly identified and valves are installed in accordance with flow direction
  • ENGTP - Mechanical engineer

    2005 - 2007  In charge of safety (HSE) until completion of the work, monitoring and ensuring good HSE practices ( including housekeeping), and following procedure including safety observation schemes

     Supervision of static and rotary equipment (vessel, colum, heaters ,pumps, compressor,gas turbine , turbo expender).

     Completion mechanical, punch list and walk down

     Hydrostatic test and purging operation

     Organizing meeting with the client

     coordinator work progresses with the main contractor and the client

     wetnissing for oil flushing (GAS TURBINE )

Formations

  • Université Des Sciences Et De La Technologie D'Oran (Oran)

    Oran 2002 - 2007 ingénieur mécanique

Réseau

Annuaire des membres :